
Contents
Quick summary
- When a major release hits, liquidity thins out. The usual result is a wider spread, more slippage and sharp moves in both directions.
- A stop loss is a conditional market order, not a promise of a specific exit price. If price jumps past your stop, you are filled at whatever the market offers.
- Your best tools before a release are a smaller position and a decision made in advance: stand aside, or trade with written rules. Predicting the number is not one of them.
- After the release, patience is cheap. Waiting for the spread to settle and a new structure to form usually beats entering in the first seconds.
Trading during news releases is the most tempting and often the most expensive part of the trading day. Tempting, because price can move in seconds as far as it normally moves in hours. Expensive, because the moment price moves fastest is also the moment executing an order costs the most.
This article explains why spreads widen around major economic releases, where slippage comes from, why a stop is not a fixed-price instruction, and which checklist helps before and after a release. The goal is not to tell you when to buy or sell. It is to help you see the real execution risk of a news event and adjust your size and plan before it arrives.
What actually happens when a release hits
In a normal market, there is a steady supply of buy and sell orders at prices close to each other. When a number such as CPI or an FOMC statement is published, many participants do the same things at once: cancel resting orders, reassess fair value, and place new orders. For a few seconds, sometimes a few minutes, the order book is thin, and a single large market order can run through several price levels in one go.
Timed releases have a clock time; all-day events do not. The FundoraTrade economic calendar and the Federal Reserve’s own FOMC calendar page are good places to confirm the “when” before you think about the “what”. Check the calendar’s time zone against your own: Tehran time is UTC+3:30 with no daylight saving, but the US and Europe change their clocks, so the gap between Tehran and New York or London shifts twice a year.
Why the spread widens
The spread is the gap between the best price to buy and the best price to sell. When liquidity falls and the firms quoting prices feel more uncertain, they quote a wider gap. That gap is a cost. A trade that would normally start with a small spread cost now starts with a larger one. If your stop is close, the widened spread alone can trigger it, even though the “real” market price never reached your level.
Slippage and requotes
Slippage means your order fills at a different price than the one you expected. In a fast market, price moves between the moment you click and the moment the order reaches the market. Some platforms send a requote instead: a new price you must confirm.
Whipsaw: the first move is often not the last
Price sometimes jumps in one direction right after a release, then reverses and runs the other way. This is a whipsaw. The first reaction can come from automated orders and position clearing rather than a considered view of the data.
Why a stop does not fix your exit price
Many traders treat a stop loss as a hard cap on loss. In practice, a standard stop is an instruction: once price touches the stop level, send a market order to exit. From that moment the exit price is whatever the market gives you. If price leaps over your level during a release, the order fills at the first available price, which can sit well beyond the level you picked.
Gaps over stops
A gap occurs when price moves from one level to another without trading at any level in between. Suppose price is at 100, then the next trade prints at 102, with nothing at 101. A stop at 101 gets filled at 102 or worse.
Pre-news checklist
The best decisions about a release are made before it, not during the seconds when price is moving. Run through this list before any major event.
- Check the economic calendar and mark the release that affects your instrument.
- Decide, in writing, whether you will stand aside or trade with rules.
- If you hold a position, recalculate its risk: what is the loss if the stop fills with slippage?
- Reduce size. When execution risk is unpredictable, a smaller position is the simplest control.
- Avoid opening new trades in the minutes just before the release, when liquidity is thinner and spreads are changing.
- Treat two same-direction positions on correlated instruments as one larger risk, not two separate ones.
Stand aside or trade
Neither choice is right or wrong in itself. Standing aside means you avoid uncertain execution and give up the chance of a move. Trading with rules means you accept the execution risk and pair it with a smaller size and a clear plan. The real mistake is not choosing at all.
Execution risks at a glance
| Risk | What happens | Effect on the trade | Practical response |
|---|---|---|---|
| Wider spread | The gap between buy and sell prices grows | Entry cost rises and a close stop can trigger early | Delay entry until the spread settles |
| Slippage | The fill differs from the expected price | Actual loss exceeds planned loss | Cut size and include slippage in your risk |
| Thin liquidity | Few orders rest in the book | A large order moves through several levels | Use smaller size or skip the event |
| Whipsaw | Price spikes one way, then reverses | Stops can trigger on both sides | Do not trust the first reaction; wait for structure |
| Gap | Price jumps over a level | The stop fills beyond its set level | Assume the worst loss is larger than the one in your plan |
Hypothetical example: a stop with slippage
This example is hypothetical and only shows the arithmetic; real numbers differ by instrument and platform. Say your account is $10,000 and you risk 1% per trade, which is $100. On a currency pair you place a stop 20 pips from entry and assume a pip is worth $10 per standard lot (roughly true for pairs quoted in US dollars). Position size = 100 ÷ (20 × 10) = 0.5 lots.
Now suppose that during a release, price jumps over the stop and the exit fills 6 pips beyond it. The real loss is 26 pips: 26 × 10 × 0.5 = $130, or 1.3 times the planned risk (1.3R). Had you traded half the size, 0.25 lots, the same slippage would have cost 26 × 10 × 0.25 = $65, which is 0.65 times your original $100 risk. Even with slippage, that stays below it.
A stop does not turn your loss into a fixed number; when execution risk is higher than normal, position size limits the worst case. If you are unsure of the pip value for your instrument, check it with the pip value calculator.
After the release
The first minutes after a release are the riskiest: excitement is high and execution has not normalized. A short routine helps.
- Wait a moment and watch the spread. Until it returns to its normal range for that instrument, entry costs more than usual.
- If you hold a position, confirm that your stop or take profit actually filled before you change anything.
- If you do enter, size the trade from your real risk and a structural stop, not from the excitement of the last move.
- Log the result: spread at entry, actual slippage, and the outcome in R.
Common mistakes
- Entering minutes before the release at normal size, hoping for a favorable jump.
- Believing a stop loss fixes the exit price.
- Placing the stop extremely close so that risk “looks” small.
- Stacking several same-direction positions on correlated instruments.
- Entering in the first seconds after the release simply because price is moving fast.
Work out your risk before the release
FundoraTrade’s calculators help you check position size, pip value and real risk before you enter a trade.
Frequently asked questions
Is trading during news always dangerous?
Danger depends on size, plan and instrument, but execution risk during a release is usually higher than normal. Wider spreads, slippage and gaps can make the real loss larger than the planned one. Small size and a written plan help manage that risk, but nothing removes it completely.
Why did my stop not fill at the price I set?
A standard stop sends a market order once price reaches your level, and the market decides the fill. If price jumps over the level during a release, or liquidity is thin, the order fills at the first available price, which can be worse than the level you chose.
Before a release, should I cut size or tighten the stop?
Cutting size is usually the more sensible choice. A very tight stop can be triggered by a widened spread or a brief spike and may take you out before the move you expected. A smaller position controls the money at risk without cutting the stop away from market structure.
How long should I wait after a release?
There is no fixed time; it varies by instrument and by the importance of the event. A better test is whether the spread is back in its usual range, orders are filling normally, and a new structure is visible on the chart. Until then, a new entry carries extra execution risk.
Does this article cover prop account news rules?
No. It covers market and execution risk only. Rules for any specific account or firm are set by that firm, and you should read them in the firm’s own official text. Nothing here replaces that.
Further reading
- Federal Reserve — FOMC Meeting Calendars and Information
- U.S. Bureau of Labor Statistics — Consumer Price Index
- CME Group — Education
Risk warning: Trading in financial markets, including forex and futures, carries the risk of losing part or all of your capital and is not suitable for everyone. Around news releases, spreads, slippage and gaps can make actual losses larger than planned losses. This article is for educational purposes only and is not investment advice or a trading signal. FundoraTrade is not a broker. Before making any decision, check the rules and specifications of each instrument from official sources, and trade only with capital you can afford to lose.