Skip to content
FundoraTrade
Gold3,538.2▼2.38%EUR/USD1.0968▲0.01%Bitcoin60,718▲1.07%Dollar index103.84▼0.08%US 10Y yield4.95%▼1.98%Updated 17:19 UTC · Delayed quotes, not for trading
Trading Education

Real Trading Costs: Spread, Commission and Swap

Real Trading Costs: Spread, Commission and Swap
Contents

Quick summary

  • Spread, commission, swap, slippage and deposit or withdrawal fees all come out of your net result.
  • Costs are roughly fixed per trade, so the tighter your stop and target, the bigger their share of your risk.
  • Express cost in R: divide the round-trip cost by the amount you risk, and see how much of an R disappears before price moves.
  • To compare accounts honestly, put every cost component side by side for the same trading style, not just a headline spread.
  • All numbers in this article sit inside one hypothetical example. Read real costs from your own fee schedule.

When a new trader reviews a trade, the focus is usually on entry and exit prices. Between those prices sit several small trading costs that, added together, can separate a workable strategy from one that slowly bleeds. This guide covers spread, commission and swap one by one, then shows how to write each trade’s cost in R.

FundoraTrade is an education and review resource, not a broker, and this article names no firms. The aim is a method for testing any account honestly and seeing how its costs fit your style, especially if you scalp or aim for small targets.

The parts that make up trading costs

Trading cost is not one number. Five separate components exist, and each leaves your account at a different moment.

Spread

The spread is the gap between the bid (the price you can sell at) and the ask (the price you can buy at). Open a long position and you enter at the higher price while your exit is valued at the lower one, so the trade starts slightly negative. You pay it once per round trip, and it never appears as a separate line on your statement, which is why it is so easy to forget.

Spread is not constant. It tends to widen in thin liquidity, around major news and near market open or close, so the spread advertised for the best hour is not the one you get all day.

Commission

Commission is a separate charge for executing the trade, usually per lot or per contract. Some accounts have no commission and build the cost into a wider spread; others keep the spread tight and charge commission. So comparing “spread only” tells you very little.

Swap (rollover)

Swap (rollover, or overnight financing) is a credit or debit applied when a position is held past the daily cut-off time. It can be positive or negative and depends on the symbol, trade direction and interest rates. On many platforms one weekday carries a multi-day swap covering the weekend; check the symbol specifications.

For a scalper or intraday trader who is flat each night, swap hardly matters; for a swing trader holding several nights it can matter as much as the spread.

Slippage

Slippage means the executed price differs from the price you saw. In a fast market a stop order fills at the next available price, not necessarily the number you set. It can work in your favor, but on stops and market entries it usually costs you.

You cannot calculate slippage in advance, but you can estimate it by logging planned and filled prices in your journal.

Deposit, withdrawal and currency conversion

These never show up on a chart: payment method fees, the gap between the conversion rate you get and the fair rate, and sometimes a fixed fee per withdrawal. They depend on how often you move money, not how often you trade, and on a small account their share becomes noticeable.

Why costs weigh more on small targets

A trade’s cost is tied to a few pips or ticks, not to the profit you hope to make. The closer your stop and target, the larger the share that fixed cost takes from your risk, which makes scalping the style most sensitive to cost.

Cost versus stop distance

Say spread plus commission total one and a half pips. With a stop 50 pips away that is a small slice of your risk; with a stop 5 pips away it is a large slice of 1R.

How costs raise the break-even win rate

Costs make wins smaller and losses larger than 1R, so the win rate needed to break even rises. A strategy positive before costs can turn negative after them, so rerun any backtest with realistic costs. The trading strategy simulator shows how win rate and risk interact.

Writing the round-trip cost in R

To compare costs across trades and accounts, express them in the unit you use for risk: divide the round-trip cost in dollars by the risk on that trade, your 1R. That is how much of an R each trade costs before anything else happens.

Steps for the calculation

  1. Work out position size first, from your fixed risk and stop distance, with the position size calculator; every cost below scales with it.
  2. Write the spread in pips or ticks and convert it to dollars with the pip or tick value from the pip value calculator or the futures tick value calculator.
  3. Multiply the dollar spread by your position size to get the spread cost for that position.
  4. Add the round-trip commission for the same size. If commission is quoted per side, count it twice.
  5. Add a slippage estimate from your journal, plus expected swap if the position stays open overnight.
  6. Divide the total by the amount you risk (1R), log the figure beside every trade and read your average cost in R after a few dozen trades.

How to compare accounts fairly

Advertising usually leans on one number, such as a low spread or zero commission. A fair comparison puts all components side by side for one identical scenario: same symbol, size, time of day and holding period.

Cost component Where it shows up What changes it Question to ask when comparing
Spread Inside the entry and exit prices Time of day, news, liquidity How wide is it in my trading hours?
Commission Separate line in account history Account type, size, market Quoted per side or per round trip?
Swap After the rollover time Symbol, trade direction, interest rates Credit or debit on multi-night positions?
Slippage Gap between requested and filled price Market speed, order type, execution quality How far from my stop do my fills land?
Deposit and withdrawal When money moves Payment method, conversion rate, minimum amounts What does one deposit-and-withdraw cycle cost?

The cheapest account is not automatically the best: slow execution or trouble with withdrawals can erase what a tight spread saved. Check a firm’s legal status with an official regulator.

Hypothetical example: a scalp and a swing trade

This example is entirely hypothetical and only shows the mechanics; the numbers are not the terms of any real account. Assume an account of $10,000, risk of 1% per trade ($100, which is 1R), a pip value of $10 per standard lot (typical for pairs where the dollar is the second currency), a spread of 1 pip, a round-trip commission of $6 per lot and zero slippage. In both scenarios the target is 1.5 times the stop distance.

Scenario one: a scalp with a 5-pip stop

Position size = 100 ÷ (5 × 10) = 2 lots. Spread cost = 1 × 10 × 2 = $20. Commission = 6 × 2 = $12. Total $32, which is 0.32R. A win returns about 1.18R instead of 1.5R; a loss costs 1.32R instead of 1R.

Scenario two: a swing trade with a 50-pip stop

Position size = 100 ÷ (50 × 10) = 0.2 lots. Spread cost = 1 × 10 × 0.2 = $2. Commission = 6 × 0.2 = $1.20. Total $3.20, or 0.032R. Ten times less, with the same spread and commission per lot.

Effect on the break-even win rate

Expectancy per trade = (win rate × average win in R) − (loss rate × average loss in R) − cost, all in R. With a 1.5 target against 1R risk and no costs, break-even is a 40% win rate: 0.4 × 1.5 − 0.6 × 1 = 0. In the scalp scenario the cost is 0.32R, so the formula becomes 2.5 × win rate − 1.32, and break-even moves to about 53%. In the swing scenario it becomes 2.5 × win rate − 1.032, which breaks even near 41%. Same strategy, same reward-to-risk ratio, very different required win rate, purely because of stop size.

Common mistakes

Most cost errors come from undercounting.

  • Comparing accounts on spread alone (or commission alone) and assuming spread stays fixed during news.
  • Backtesting with zero costs, then being surprised live.
  • Scalping with a tiny stop without checking the share of 1R that cost consumes.
  • Holding overnight without checking the swap for that symbol and direction.
  • Leaving deposit, withdrawal and conversion costs out of overall results.

On a prop firm account, costs come out of your balance and can fill the daily drawdown limit sooner than expected. Run your real risk and cost through the prop firm drawdown calculator.

Count the cost before you enter

FundoraTrade puts the position size, pip value and tick value calculators and a strategy simulator in one place, so you can see each trade’s risk and cost before you take it.

Explore the FundoraTrade tools

Frequently asked questions

What is the difference between spread and commission?

Spread is the gap between buy and sell prices, hidden inside the price; commission is a separate execution charge. Some accounts have both, some one, so compare total round-trip cost.

Should I always choose a swap-free account?

Not necessarily. If you never hold overnight, swap barely matters. If you do, read the terms, because the cost is sometimes recovered through a fee or wider spread instead.

Why does spread widen around news?

At a major release liquidity thins and prices move fast, so the bid-ask gap usually grows. See release times on the Fundora economic calendar.

What is an acceptable cost per trade?

No single figure fits everyone. Express cost in R and check how far the break-even win rate climbs.

Where can I read my real costs reliably?

In your platform’s symbol specifications, the account’s official fee schedule and your own trade history.

Further reading

Risk warning: Trading in financial markets, including forex and futures, carries the risk of losing part or all of your capital and is not suitable for everyone. This article is for educational purposes only and is not investment advice or a trading signal. The example numbers are hypothetical and are not the terms of any account. Before any decision, check costs and rules from official sources, and trade only with capital you can afford to lose.